Electrode paste is used in closed electric smelting furnace as continuous self- baking electrode.
Electrode paste is used in closed electric smelting furnace as continuous self- baking electrode to produce calcium carbide, ferroalloy and so on. During the furnace operation, electrode paste acts as current conductor.
Our electrode paste has following characteristics:
1. Lower ash content;
2. Acurate dosing and stable volatile content;
3. Good electric and thermal conductivity and the sintering speed apropriate to that of consumption of working end;
4. Smelting at lower temperature with certain fluidity and homogeneous composition;
5. High resistance to high temperature, oxidation and thermal shock, low resistivity and high mechanical strength after sintering.
The properties of electrode paste are as follows:
Ash < 6% or 4%
Volatil material 12- 15. 5%
Compressive strength> 17Mpa or 18Mpa
Electric resistivity <75micro ohm m or 65
Bulk density > 1. 38g/ cm3
Size: 125*125*60 mm or 100*90*60 mm
We can offer electrode paste as your special properties demand. At same time, we can also supply tamping paste for furnace building. Our electrode paste export to Thailand, Pakistan, Africa, South- East Asia, South American, etc.
