Place of Origin: Shandong China (Mainland) Brand Name: Jiahe Model Number: LP
Application: cathodic protection Shape: rod bar Material: h- 1 alloy, astm az63
Dimensions: rod bar Chemical Composition: h- 1 ally
Packaging & Delivery
Packaging Detail : Wooden case
Delivery Detail According to the order quantity
H- 1 ALLOY CAST MAGNESIUM ANODES, Material according to ASTM AZ63 Standard.
H- 1 ALLOY CAST MAGNESIUM ANODES
Supplying Cost Effective Protection
Electrolytic conditions in the soil surrounding a buried structure often determine the type of anodes employed in a cathodic protection system. In lowresistivity soil (under 2000 ohm- cm) , Corrpro’s H- 1 line of magnesium anodes are the most economical choice. Corrpro Certified H- 1 anodes are cast to meet American Society for Testing Materials Standard B80, Alloy AZ63. This unique composition allows for even- current output and efficient protection. The anodes are supplied in three quality grades, all of which produce an open circuit potential of 1. 53- 1. 55 volts.
Special procedures are also employed in the production of the Certified H- 1 anodes to ensure long- life performance. Lead wires on all three grades of anodes are silver soldered and then potted with a sealant to prevent the intrusion of moisture.
Typical Applications
H- 1 anodes are reco mm ended for use in low- resistivity soils (typically below 2000 ohm- cm) . Because the anodes have a lower driving voltage than high- potential anodes, they are ideally suited for structures where over protection is of concern. Their lowercurrent output also allows these anodes to operate longer than their high- potential counterparts in more conductive environments. Chemical Composition
