Slab Tilting Machine

Place of Origin: Uttar Pradesh India Brand Name: REMSO Model Number: STM

Material: Steel SLAB TILTING MACHINE: SLAB TILTER



SLAB TILTING MACHINE / THICK PLATE TURN OVER DEVICE / THIN PLATE TURN OVER DEVICE along with other subsidiary units

Remso Slab Tilting Machine consists of Receiving Arm and Lifting Arm fitted with rollers operated hydraulically driven and electrical motor complete with rotation sensor. The purpose of the slab Tilting Machine is to rotate the slab with the individual weight of 45 Ton by 180o / turn the slab for surface inspection after cooling or for torching the underside of the slab. The slab can be transported in or out via a roller table or using a dogging crane. Having the followings features are included in Slab Tilting Machine: a) Slab resting platform in receiving arm as well as lifting arm. b) Total power requirement for operation of system is 500Amp 440Volts. c) Scale removal system acco mm odated in the machine. d) Hydraulic oil and lubrication collection system. e) Control post (working panel) shall be near by machine and along with pendent system. f) Operation Control: Either pendent or Local Control Post shall be operative at a time. g) All the hydraulic cylinders is progra mm able, i. e. , individually and sequentially. h) Operational Speed of the machine: Minimum rate of slab tilting shall be 20 slabs per hour. i) Slab basic Data / lab tilter capacity - 20 up to 25 slabs / hourTilted slab weight max. 50 MTTilted slabs width 800 up to 1680 mm Slabs length 6000 up to 12500 mm Slabs thickness 230 mm (can vary from 200 mm - 250 mm ) l) Slab holding (gripping) mechanism to be provided The slab is lifted using the lifting arm and placed on the receiving arm for the inspection of another surface of the slab. The Slab tilter is reliable with a high degree of efficiency and integrated with hardware & software. The equipment is designed for the needs of large metallurgical plants. Which enable the exact inspection of the both sides of the slabs thoroughly. Design features: Twin track machinesRotating of slab upto 180oCCylinder travel stroke – 900 mm Speed of lowering and rising Arm – 30 mm / sec Slab thickness rang from 200 mm - 250 mm Slab Guide SystemsSlab guide arrangement with gripping mechanism is made of Heat resisting steel. Arm controlling box enables manual lowering and rising of Arm on emergency demand. Accessories Scale collection system for easy removing of scale. Oil & Lubricants collection system.