Place of Origin: Russian Federation Grade: ASTM, GOST, OTHERS Chemical Composition: relevant for grade
Size: most
Steel Billets - ASTM - GOST - OTHERS
Steel billets
OriginDiameterStandards
Chusovo Metallurgical Works 99 mm , 122 mm GOST 380- 94 3 SP/ PS and 5 SP/ PS Also (and with a special order in advance: ASTM, AISI and Q235 billets can be supplied.
West Siberian Metallurgical Works (Novokuznetsk) 80 mm , 100 mm , 150 mm
Izhstal 50 mm , 60 mm , 70 mm , 80 mm , 90 mm
Kuznetsk Metallurgical Works (Novokuznetsk) 10 mm , 160 mm
mm K most sizes between 50 and 124 mm
Mechel 60 mm through 180 mm
Petrostal 100 mm , 105 mm , 115 mm , 120 mm , 125 mm , 140 mm , 150 mm , 160 mm , 170 mm , 180 mm , 190 mm , 200 mm
Nosta 80 mm , 100 mm , 120 mm , 140 mm , 160 mm , 180 mm , 200 mm , 220 mm , 240 mm
Sevzapstal 60 mm , 100 mm , 125 mm
Seversky Pipe Works 140 mm
Severstal 80 through 150 mm
Sibelektrostal 82 mm
Stax (Sulino) 100 mm
Elektrostal 85 mm through 125 mm
Zlatoust Metallurgical Works 40 mm through 160 mm
More on Grades
We offer to supply (square) steel billets made from co mm on quality carbon steel according to GOST 380- 94 (GOST 380- 88) and TU 14- 1- 4492- 88, TU - 14 2 813 88 in grades of 3 SP/ PS and 5 SP/ PS (although these are the most co mm on grades available for export, other grades such as St 2 SP/ PS may be supplied under special conditions at a different, usually slightly higher, price) . made of co mm on quality carbon steel under GOST 380- 94 ( Complete standard - in Russian available)
and TU 14- 1- 4492- 88, TU - 14 2 813 88.
Chemical Composition
Chemical Composition of:
St 3 SP/ PS :
C: 0. 14 - 0. 22 % , Mn: 0. 40 - 0. 65 % , Si: 0. 05 - 0. 15 % , P: 0. 04 % / max, Cr: 0. 30 % / max ,
Ni: 0. 30 % / max, Cu: 0. 30 % / max
St 5 SP/ PS :
C: 0. 28 - 0. 37 % , Mn: 0. 50 - 0. 80 % , Si: 0. 05 - 0. 15 % , P: 0. 04 % / max, Cr: 0. 30 % / max
Ni: 0. 30 % / max, Cu: 0. 30 % / max
Mechanical Properties:
Tensile strength: 37 - 48 Kg/ mm 2, Yield strength: 26 Kg/ mm 2, Elongation: 23 %
Tolerances:
Square tolerance: +4. 0 - 4. 0, Length tolerance: + 100 mm ,
Romboidity/ Difference diagonals: no more than 0. 7 %
Camber: no more than 1. 5% (% ) ,
Twist: does not exceed 3 degrees per 1 m in length
Packaging
Packing: In bundles with weight of up to 5 MT or up to 10 MT .
Minimum export quantity of billets is 1000 MT per size, +/ - 10% up to 5000 MT, with shipments over 5000 MT, tolerance may decrease to +/ - 5%
Order Conditions
Maximum quantity: 20 000 MT per shipment!
Maximum Production: 100000 MT per month
Far East/ India minimum order: 10. 000 MT *
Shippingtime: 35 days after receit of payment / LOC / other arrangement
**if shipment by break bulk (i. e. not separate vessel but together with other cargo) then the quantity can be reduced to 1000 MT **
