Wearback "HI" - Crusher Backing Material

WEARBACK HI is a 100% solids modified epoxy resin system formulated for the use as a superior

LARGE CONE CRUSHERS / GYRATORY CRUSHERSDescription

WEARBACK HI is a 100% solids modified epoxy resin system formulated for the use as a superior backing compound for crusher liners. When cured it provides a high compressive strength support for wear liners.

WEARBACK HI is supplied in safe and convenient kit form for easy mixing and applicationPreparation

Seal all crevices with putty or other suitable material to prevent backing material from leaking out. Mixing

The resin and hardener must be thoroughly mixed together before application by using a slow speed drill. Mixing continues until uniform colour is obtained (3- 5 minutes) With ambient temperature at 25?C a full kit must be poured into place within 15 20 minutes. Compressive strength 160 Mpa

Flexural strength 66 70 Mpa

Modulus of elasticity 10 15 Mpa

Tensile strength 38 45 Mpa

Gel time 20 Min at 25?C

Curing time 8 Hours at 25?C

Working Time 10 Min at 25?C

Heat distortion 95?C

Caution

When using epoxy resin systems, care should be taken to avoid contact with skin, eyes and clothing.

Use gloves and eye protection when handling. Do not inhale vapour. Ensure there is sufficient airflow through the work area. KIT SIZE: 10kg and 20kg