perforated metal panels,perforated metals

Place of Origin: Hebei China (Mainland) Brand Name: Jinshi Model Number: JS- 004

Application: decorative Shape: round Material: aluminum sheet

Dimensions: 1250 mm *2500 mm Chemical Composition: materials

Packaging & Delivery

Packaging Detail : Steel Pallets

Delivery Detail 7- 30 Days





Thickness: 0. 2 mm - 20 mm

Hole size: 0. 254 mm - 229 mm

Shapes: round, square, slot, hex, oval, diamond

Materials: carbon steel, galvanized

Perforations

Round Perforations: Staggered (60 degree pattern) is standard. Variations include 45 degree staggered, and straight line pattern.

Square Perforations: Staggered or straight line pattern.

Slotted Perforations: Side staggered, end staggered, or straight lines. Slotted

perforations will be round end slots; specify if square end slots are required.

Other Perforations: Available upon request.

Spacing of Perforations

Spacing for large perforations will be designated be either Centers of perforations, or by the Open Area required. Spacing for small perforations will be designated by either Centers, or Open Area, or if more practical, by the Number of Perforations to the Square Inch.

Pattern of Perforations

Staggered Perforations, both Round & Square: Direction of the stagger will

normally be the short dimension of the sheet. Straight row of hole is normally parallel

to long dimension of sheet.

Slotted Perforations: The long dimension of the slots can be furnished with either the

width or length of the sheet in most cases.

Margins

Perforated Stock Size Sheets & Plates: The long sides of the sheet will be supplied

with minimum margins. The short sides of the sheet will have either minimum margins

or no margins.

Sheets & Plates Re- sheared after Perforating: Special margins are available to

but they must carry a tolerance within the limits of the perforating tool.

Unfinished end pattern is standard in the industry.

Flatness of Sheets & Plates

In the majority of requirements, perforated sheets or plates can be furnished to AISI flatness tolerances. Before ordering any of the following special requirements, discuss then with our sales department:

Perforated sheets with extra wide margins.

Blank areas required within the perforated area.

Perforated sheets with very large percentage of open area.

Heavy gage metal in relation to the size of the perforation.

Special alloys.

Stretcher leveled sheets.